Calcium Silicate Board Variable Frequency Drives A variable-frequency drive (VFD) (also termed adjustable-frequency drive, variable speed drive, AC drive, micro drive or inverter drive) is a type of adjustable-speed drive used in electro-mechanical drive systems to control AC motor speed and torque by varying motor input frequency and voltage.

Cables Cables These connecting and control cables are used in machines and plants for instrument engineering. These cables are universally applicable, resistant to many oils and chemicals and are highly flexible and sturdy. There are a wide range of flexible cables such as color coded, number coded, copper screened, steel wire braided, polyurethane cables, neoprene rubber cables, robotic cables, super flexible cables with minimum bending radius and all types of weather resistant cables.

Electrical Motor Electrical Motor With an electric motor, you can always achieve the highest efficiency level. Motor systems cover the entire range of synchronous and asynchronous technology. From standard electric motor systems and servomotors for Motion Control applications including linear and torque motors to motors for use in hazardous explosion areas, to high voltage, DC and customized electric motor systems.

Attenuator Attenuator An attenuator is an electronic device that reduces the amplitude or power of a signalwithout appreciably distorting its waveform. An attenuator is effectively the opposite of an amplifier, though the two work by different methods. While an amplifier providesgain, an attenuator provides loss, or gain less than 1.Attenuators are usually passive devices made from simple voltage divider networks.

Circuit Breaker Circuit Breaker A circuit breaker is an automatically-operated electrical switch designed to protect anelectrical circuit from damage caused by overload or short circuit. Its basic function is to detect a fault condition and, by interrupting continuity, to immediately discontinue electrical flow. Unlike a fuse, which operates once and then has to be replaced, a circuit breaker can be reset (either manually or automatically) to resume normal operation.

Insulators Insulators An electrical insulator is a material whose internal electric charges do not flow freely, and therefore make it nearly impossible to conduct an electric current under the influence of an electric field. This contrasts with other materials, semiconductors andconductors, which conduct electric current more easily. The property that distinguishes an insulator is its resistivity; insulators have higher resistivity than semiconductors or conductors.

Trivector Meter Trivector Meter The Trivector meter is a measuring instrument which measures the kW, kVAr, the kVA of a power line. These instruments can measure both power as well as energy. Trivector meters are normally used in substations and to measure the power flowing through the feeders. They are used for billing power drawn by industrial customers. The Trivector enables the simultaneous measurement of different electrical parameters which enables accurate assessment of the power consumed.

Polymer liners
Carbon Brush
The primary function of a Carbon Brush is to deliver or collect current from a rotating part of an electric Machine. The brushes should maintain a close contact with rotating part, (i.e. Commentators or slip ring) / in order to ensure sparkles operation without wearing itself too quickly. There are various types of Carbon \ Brushes in different types of Grades and Size which are used in electrical D.C.Motors, Slip Rings Motors Power Generators, welding Generators etc. All the Textile Mills are Running with the above electrical equipments. We are manufacturing Carbon Brushes as per specific grades and sizes.
Application
  • DC/AC Motors
  • Slip Rings Motors
  • Power Generators
  • Welding Generators
  • Crane Installation
Types of Carbon Brushes
  • Electro Graphite
  • Resign Bonded
  • Pitch Bonded
  • Copper impregnated
  • Silver Impregnated & Copper
  • Graphite
Carbon Brush Characteristics
  • Conductive
  • Soft enough to provide a good wear point against the copper segments
  • Does most of the wearing away in this application
  • Fairly easy to replace them